4 Feet wood veneer rotary peeling machine with double row-manufacture,factory,supplier from China

The veneer peeling machine and knife grinding machine recently purchased by our Ugandan customers are now finished and ready to be shipped. Thank you for your trust in us. In addition to the veneer peeling machine, we also specialize in the production of biomass burner veneer dryers. If You are welcome to consult us at any time if you need it.

The 40 meters double layer biomass veneer dryer purchased by the Indonesian customer has been delivered, together with our biomass burner. The biomass burner is our patented product, which can directly burn waste wood, greatly saving the cost.

Our four-layer veneer dryer purchased by Myanmar customers is used to dry oak and received good feedback from the customer.It is used together with the biomass burner.The biomass burner acts as a heat source to provide high temperature for the dryer to ensure sufficient heat to effectively impact the wet veneer.At the same time,the bark of the peeling machine and the waste veneer of the rotary cutting machine are burned directly as fuel,which solves the problem of waste accumulation in the veneer plywood factory.

The 4 deck veneer dryer purchased by our customer was installed and debugged by our engineers at the customer's factory. It has been installed and is ready to be debugged. Customers are welcome to visit the equipment on site. It is made of biomass burning It can burn all kinds of waste wood and reduce the drying cost for you.

The 4 deckveneer dryer purchased by our customers in Guizhou has now been produced and is being shipped to customers.Shine heat exchanger adopts step by step heat transfer,and the specifications of each section of the heat exchanger are different,and the hot air in the heat exchanger can be uniformly emitted to the veneer.The veneer after drying has uniform moisture content,flat,no buckle or end waviness;free of splits and the surface is in good condition for gluing.

The second 56m double-layer veneer dryer purchased by Huaxia Group Congo Branch was installed and successfully operated in Gongo,  the veneer dryer is equipped with our 6ton biomass burner , which can use the crushed waste wood as fuel directly and can save the drying cost to the most .The customer is very satisfied with our products !

Xishuangbanna customers ordered two set  58 meters 4.5 meters wide double layer  roller veneer dryer ,which use thermal oil as fuel . They two veneer dryers were installed well and put into use successfully . they will dry the rubber veneers and welcome to visit and give suggestion. 

The veneer dryer is specially designed and produced for drying wood, veneer, wood veneer and sawdust. It has the advantages of large drying capacity, remarkable energy saving effect and less maintenance.The material enters the dryer through the joint action of the blowing pipe and the rotary drum. The material boils and flows in the drum, and the hot air fully contacts with the material to complete the drying work. During the use of the dryer, some problems may occur.

When purchasing a veneer dryer, you should pay attention to: a good quality dryer has reasonable design, stable operation, energy saving and environmental protection, which can effectively improve the production capacity and quality of the dryer, and at the same time reduce the production cost of the dryer and the wear of parts , Consumption, reduce equipment maintenance costs. From the perspective of the performance of the veneer dryer, a good-quality dryer has the advantages of reasonable structure, low energy consumption, long service life, and durability.There are many types of kiln wood.

Shine fully automatic 4 layer roller veneer dryer put into production in Guangdong recently . With automativ veneer feeding device and automatic veneer collection machine , big capacity plywood veneeer drying machine can save labor cost to the most .